1st Station: Functional Tester:
- Power balance, voltage, frequency and power measurements up to 50 amps.
- A 2D bar code scanner in the adapter registers and identifies the specimen once it is insertedinto the adapter.
- Mechanical design of MCD PIC8IO
- Overheating is counteracted during the testing process via a compressed air supply.
- The mutex server provides the level of communication between multiple instances of TestManager.
- Power control via PWM control.
- Fail-test items are marked.
2nd Station: Assembly space:
- The housing of the fan control board is pressed together manually.
- Before pressing, the serial number is identifiedby a handheld scanner.
- A barcode is automatically printed and attached by the operator.
- The correct compression is checked by means of force-displacement measurement.
3rd Station: 'End-of-line' Test System:
- After assembly, the specimen in the 'End of Line' adapter is inserted and closed manually.
- The functional testing begins automatically.
- Current, voltage and frequency test measurements are performed here as well.
- The start-up and short-cut performance of the specimen is also tested.
- The mechanical handling takes over the MCD PIC8IO control.
- A handheld scanner reads the barcode.
- Power control via PWM control.